Kako sem naložil Fedoro na Macbook pro in preživel.

To pomeni samo linux nič več Mac OSX.

Pomembno:

1. Na disku mora ostati prva particija velikosti 200MB na kateri je EFI.

2. Vse ostalo lahko razdelimo po želji. Sam sem uporabil LVM…

3. Po reštartu nastopi “problem”. Sistem se ne več boot-a !!!!!

4. Ob reštartu držimo Option key oz. alt tipko. Kar pomeni, da gremo v EFI (jaz imam nastavljeno geslo). Vtipkam geslo, pritisnem Enter in pojavi se ikona

z “windows diskom”, še enkrat pritisnemo Enter in Fedora se začne nalagati.

5. Mogoče kmečka rešitev vendar imam sistem zaščiten z geslom in še vsak ga ne zna zagnati.

!!! 6. Popravek: po nekaj reštartih EFI ne več sprašuje za geslo in linux se čisto lepo zažene (kar je tudi uredu).

Vse ostalo dela tako rekoč Out of the box.

Če se pa hočemo še malo igrati, ….

Nastavitev desnega klika na touchpad-u (kar je odebeljeno je potrebno dodati v /etc/X11/xorg.conf datoteko).

# Xorg configuration created by system-config-display

Section “ServerLayout”
Identifier “single head configuration”
Screen 0 “Screen0” 0 0
InputDevice “Keyboard0” “CoreKeyboard”
InputDevice “Synaptics Touchpad” “CorePointer”
EndSection

Section “Files”
ModulePath “/usr/lib64/xorg/modules”
EndSection

Section “Module”
Load “synaptics”
Load “extmod”
Load “dbe”
Load “glx”
EndSection

Section “InputDevice”
Identifier “Synaptics Touchpad”
Driver “synaptics”
Option “SendCoreEvents” “true”
Option “Device” “/dev/input/mice”
Option “Protocol” “auto-dev”
Option “SHMConfig” “true”
Option “LeftEdge” “10”
Option “RightEdge” “1200”
Option “TopEdge” “10”
Option “BottomEdge” “370”
Option “FingerLow” “10”
Option “FingerHigh” “20”
Option “MaxTapTime” “180”
Option “MaxTapMove” “220”
Option “SingleTapTimeout” “100”
Option “MaxDoubleTapTime” “180”
Option “LockedDrags” “off”
Option “MinSpeed” “1.10”
Option “MaxSpeed” “1.30”
Option “AccelFactor” “0.08”
Option “TapButton1” “1”
Option “TapButton2” “3”
Option “TapButton3” “2”
Option “RTCornerButton” “0”
Option “RBCornerButton” “0”
Option “LTCornerButton” “0”
Option “LBCornerButton” “0”
Option “VertScrollDelta” “20”
Option “HorizScrollDelta” “50”
Option “HorizEdgeScroll” “0”
Option “VertEdgeScroll” “0”
Option “VertTwoFingerScroll” “1”
Option “HorizTwoFingerScroll” “1”
EndSection

Section “InputDevice”
# keyboard added by rhpxl
Identifier “Keyboard0”
Driver “kbd”
Option “XkbModel” “pc105”
Option “XkbLayout” “si”
EndSection

Section “Monitor”
Identifier “Monitor0”
ModelName “LCD Panel 1440×900”
HorizSync 31.5 – 56.0
VertRefresh 56.0 – 65.0
Option “dpms”
EndSection

Section “Device”
Identifier “Videocard0”
Driver “nv”
EndSection

Section “Screen”
Identifier “Screen0”
Device “Videocard0”
Monitor “Monitor0”
DefaultDepth 24
SubSection “Display”
Viewport 0 0
Depth 24
EndSubSection
EndSection

Kako nastavimo Alt Gr tipko?

System –> Preferences –> Hardware –> Keyboard –> Zavihek Layouts –> Layout Option –> Third level chooser –> Press Right Win-key to choose 3rd level

Ko spreminjamo xorg.conf datoteko je potrebno ponovno zagnati X strežnik, pri spremembi tipkovnice (Alt Gr) pa ne. Deluje takoj.